Care guide
Thank you for choosing our custom furniture. With the right care, your piece will remain beautiful and last a lifetime.
Daily Care
Avoid extreme temperatures and humidity. Ideal conditions are 20-22°C and 40-60% relative humidity.
Dust frequently with a soft, dry cloth to prevent build-up.
Prevent direct sunlight from hitting the furniture as it may fade the wood over time.
Use coasters, placemats, and tablecloths to protect the surface from heat, spills, and scratches.
Cleaning
Our pieces are finished with Rubio Monocoat Oil Plus 2C, a natural and eco-friendly oil that provides a highly durable finish while enhancing the natural beauty of the wood. Here's how to clean your furniture:
Dry Cleaning: Dust and clean with a dry, non-abrasive cloth.
Damp Cleaning: Use a damp (not soaking wet) cloth with clean water for regular cleaning. Avoid daily damp cleaning2.
Deep Cleaning: Use Rubio Monocoat Soap or Surface Care Spray for thorough cleaning. These products remove dirt and grease without leaving a film or changing the matte natural look of the wood.
Remember to allow at least five days for the oil finish to fully cure before cleaning with liquids.
Rubio Monocoat Soap and Surface Care Spray
Rubio Monocoat Soap is highly concentrated, and when diluted with water at a ratio of 1:100, it becomes Surface Care Spray. Surface Care Spray is also available in a ready-to-use spray bottle, ideal for spot cleaning spills or accidents.
Maintenance
Depending on the climate, use, and care, periodic rejuvenation of your furniture is necessary every 2-6 years. This process uses Rubio Monocoat Renew, which refreshes, restores, and protects surfaces treated with Oil Plus 2C. Use Renew when the surface starts to feel dry or rough, or when the finish has worn down due to heavy use.
We are always ready to assist you with any further queries about your furniture care. Enjoy your new piece of art!
Please note: The care instructions above are general guidelines. For specific issues or queries, please contact us.